The mo.switch basic LED is a universal, high-quality push button fitting for handlebars with 1 inch or 22 mm (7/8 inch) tube diameter in a simple, elegant design. In conjunction with an electronic push button control (not included), these CNC-manufactured push button fittings can switch all electrical units such as lights, turn signals, e-starters, horns and much more.
CNC machined from billet aluminum, the housing is anodized in gloss black.
The individual push buttons are of high quality, very robust and protected against vibration and splash water (IP65).
Due to sufficient size and ergonomic pressure point (light, mechanical detent), they enable a safe switching feeling during operation - even when operated with a glove.
Due to two connections per push button, a one-wire or two-wire circuit is easily possible. A connection for ground is already provided internally for the one-wire circuit. A cable routing in the handlebar is therefore easy to perform.
In case of possible damage, the probes are available individually and are replaceable.
Technical Data:
- Inner diameter: 22 mm and 1 inch
- Outer diameter housing: approx. 45 mm
- Width: 2 styli 22 mm, 3 styli 42.5 mm
- Pushbutton completely wired
- high quality connection cable with 1,8m length
- LED illuminated buttons
- high quality CNC milled from solid material and anodized UV resistant
- Housing color black, button black, button LED color white
- maximum pushbutton switching current: 1A, all pushbuttons switch to ground
- additional switching electronics mo.unit required