MOTUL Motocool Factory Line Coolant -35 Pre-Mix (1L)
Ready to use coolant (do not dilute) for motorcycles. Nitrite free, amine free, phosphate free, borate free, silicate free.
Specifications:
- Type: Coolant
- Protection -35℃ / -31℉
- Usage: Ready to use
- Quantity: 1 Litre
Types of use:
Motul Motocool factory line is a racing cooling liquid, ready to use, based on monoethyleneglycol, using organic anti-corrosion additives (OAT - Organic Acid Technology) to provide an outstanding protection to aluminium/magnesium alloys used by bike manufacturers on new engines design.
Performance:
Cooling system optimal protection from freezing and metallic parts from corrosion. Specific anti-corrosion agents provides the best protection efficiency on aluminium/magnesium alloys - according to a dynamic corrosion test performed on a bike radiator, MOTOCOOL FACTORY LINE divides by 3 the corrosion rate compared to a common organic coolant.
Provides an excellent thermal exchange and then engine cooling efficiency and prevents from boiling.
This organic OAT technology provides anti-corrosion properties that remain while high temperature and ageing. Low corrosion inhibitors consumption allows extended drain intervals. Water pumps protection, avoid cavitation.
Seals, rubber pipes and plastic parts friendly.
Contains a bitterness agent to prevent from drinking: coolants and antifreezes have a sweet taste but are harmful.
Recommendations:
Ready to use, do not add any water
Drain intervals: Refer to the manufacturers' recommendation.
Do not mix with non-organic products.
This product should not be used to protect drinking water systems against freezing.
Properties:
Nitrite free, amine free, phosphate free, borate free, silicate free.
Colour Visual Red
Density at 20℃ / 68℉ ASTM D4052 1.072
pH ASTM D1287 8.5
Freezing Protection ASTM D1177 -35℃ / -31℉
Boiling Temperature 136℃ / 277℉ (+1.5 bar)
Alkalinity Reserve ASTM D1121 2.9 mg KOH/g