Acewell-CCP 3xxx Case
Fits ACE-3xxx speedometers with warning lamps where the warning lamp lenses are clear and illuminate from coloured LEDs.
Not compatible with warning lamps that have a separate coloured lens.
To check your warning lamps unscrew the two little cross-head screws that hold the warning lamps into the plastic housing and pull out the warning lamps.
If the lamps that are removed have the symbols printed on them then they can be put in the billet case. If the lenses with the symbols printed on them are still in the plastic case then they cannot be fitted to this billet case.
You will need to carefully take each pin out of the multipin plugs fitted to the speedometer, thread the wires through the case and then refit the plugs. A small flat screwdriver is required to remove the pins.