The m-Unit Basic is the heart of your vehicle's electrical system: a digital hub for your motorbike. Operated by push-buttons, or more conventional switch controls mounted at the handlebar, you'll be able to take charge of all your vehicle's controls through the m-Unit. It also doubles as a fuse panel.
At roughly the size of a cigarette box, it's perfectly compact and completely moulded in. It's easily mounted by two M5 screws, with all cable connections made using terminal blocks. Add to that water, weather and vibration resistance, and the benefits of having the m-Unit really start to shine.
How does it work? All switching operations are completely digitally controlled by a microprocessor - and the latest solid-state technology. It all happens completely without mechanical relays - truly taking vehicle electrical systems to a new level.
Features of the m-Unit
- reduced standby current of 0.35 mA (equivalent to 0.00035 A) if alarm system off, and 0.48 mA (equivalent to 0.00048 A) if alarm system on - for longerbattery life
- alarm system triggered by position-independent MEMS 3D gravity sensor. Installation in every position possible
- alarm system with adjustable pre-alarm and adjustable levels of sensitivity
- alarm system can be deactivated for easy transport mode
- integrated parking light
- voltage range of 3V to 20V
- can be used with 6V and 12V electrical systems
- with extended voltage range, starting of an engine with a large displacementor high compression is no longer a problem
- protected against reverse polarity
- protected against overvoltage
- extreme cable reduction by integrating all cables of switch or push buttons control including brake light switch in the handlebar. With only one cable the m-Unit V.2 is operated via a digital bus technology (product m-Button is required)
Dimensions and specifications
L/W/H: 101 x 61 x 28 mm
Weight: approx. 180 g
Fixture: 2 x M5 screws, stainless steel (mounting and ground terminal), 1 x M5 screw-on terminal for battery positive
Operating voltage: 3V - 20V
Operating temperature: -20 °C... +80 °C
1 x input (plus, switched) for ignition lock or m-Lock
7 x pilot input (minus/ground, switched) for left turn signal, right turn signal, low beam/high beam, starter, horn, brake light, kill switch or setup respectively
8 x output (plus) for left turn signal, right turn signal, low beam, high beam, starter, horn, brake light, AUX (switched plus for all other appliances)
Parts included
m-Unit Basic, approx. 50 cm connector cable for battery plus terminal with 10 mm² nominal cross-section, 2 cable eyelets, 1 x M5 stainless steel screw, 2 x M5 stainless steel screw with nut, detailed installation and operating instructions